NETGEAR XS708T User Manual

9
1
1. Get Started
This manual describes how you can configure and operate the NETGEAR 8-Port, 12-Port, and
16-Port 10-Gigabit Smart Managed Pro Switch Models XS708T, XS712Tv2, and XS716T by
using the web-based management interface. The manual describes the software configuration
procedures and explains the options that are available within those procedures.
This chapter provides an overview of how you can start your switch and access the web-based
management interface. The chapter contains the following sections:
• Switch Management Interface Overview
• Change the Default IP Address of the Switch
• Discover a Switch in a Network With a DHCP Server
• Discover a Switch in a Network Without a DHCP Server
• Configure the Network Settings on Your Computer
• Access the Web Browser–Based Management Interface
• About the User Interfaces
• Use a Web Browser to Access the Switch and Log In
• Web Browser–Based Management Interface Device View
• Interface Naming Conventions
• Configure Interface Settings
• Context–Sensitive Help and Access to the Support WebSite
• Register Your Product
In this manual, we refer to all switch models as the switch. Unless noted otherwise, all
information applies to all switch models.
For more information about the topics covered in this manual, visit the support website at
netgear.com/support.
Firmware updates with new features and bug fixes are made available from time to time at
downloadcenter.netgear.com. Some products can regularly check the site and download new
firmware, or you can check for and download new firmware manually. If the features or behavior
of your product does not match what is described in this guide, you might need to update your
firmware.

NETGEAR XS708T Specifications

General

Switch type	Managed
Switch layer	L2+/L3
Quality of Service (QoS) support	Yes
USB 2.0 ports quantity	1
SFP+ module slots quantity	2
Installed SFP modules quantity	-
Basic switching RJ-45 Ethernet ports type	10G Ethernet (100/1000/10000)
Basic switching RJ-45 Ethernet ports quantity	8
Certification	CE, FCC Cl. A, VCCI Cl. A, Cl. A EN 55022 (CISPR 22), Cl. A C-Tick, EN 55024, CCC
Product color	Black
LED indicators	Activity, Link, Power
Number of fans	1 fan(s)
Number of VLANs	256
Networking standards	IEEE 802.1D, IEEE 802.1Q, IEEE 802.1ab, IEEE 802.1p, IEEE 802.1s, IEEE 802.1w, IEEE 802.1x, IEEE 802.3, IEEE 802.3ad, IEEE 802.3ae, IEEE 802.3an, IEEE 802.3az, IEEE 802.3u, IEEE 802.3x, IEEE 802.3z
Virtual LAN features	Private VLAN, Protocol-based VLAN
Cable types supported	Cat5e, Cat6, Cat6a, Cat7
Copper ethernet cabling technology	10GBASE-T
Noise level	29.1 dB
Flash memory	256 MB
Internal memory	512 MB
Processor frequency	600 MHz
Mean time between failures (MTBF)	276832 h
Jumbo frames	9000
Latency (10 Gbps)	3.012 µs
MAC address table	16000 entries
Packet buffer memory	2 MB
Number of static routes	32
DHCP features	DHCP server, DHCP client
Security algorithms	802.1x RADIUS
Access Control List (ACL) rules	100
AC input voltage	100 - 240 V
AC input frequency	50 - 60 Hz
Power consumption (max)	96 W
Operating altitude	0 - 3000 m
Operating temperature (T-T)	0 - 50 °C
Operating relative humidity (H-H)	0 - 90 %
Cables included	AC

Weight and Dimensions

Depth	204 mm
Width	440 mm
Height	43 mm
Weight	2980 g