NETGEAR XS708T

Specifications and Default Settings
432
XS708T, XS712Tv2, and XS716T Smart Managed Pro Switch User Manual
General Feature Default Settings
The following table describes the general feature default settings.
Broadcast storm control Enabled
MAC table address aging 300 seconds (dynamic addresses)
Default VLAN ID 1
Default VLAN name Default
GVRP Disabled
Voice VLAN Disabled
Guest VLAN Disabled
RADIUS-assigned VLANs Disabled
Multiple Spanning Tree Disabled
Link aggregation No link aggregation groups (LAGs) configured
LACP system priority 1
Routing mode Disabled
DiffServ Enabled
IGMP snooping Disabled
IGMP snooping querier Disabled
Table 96. General feature default settings
Feature Name/Setting Default
DHCP L2 Relay, Global
Admin Mode Disabled
DHCP L2 Relay, VLAN
Admin Mode Disabled
Circuit ID Mode Disabled
DHCP L2 Relay, Interface
Admin Mode Disabled
82 Option Trust Mode Disabled
Table 95. Switch default settings (continued)
Feature Default