Configure Routing
215
XS708T, XS712Tv2, and XS716T Smart Managed Pro Switch User Manual
View the IPv6 Neighbor Table
To view or clear the IPv6 Neighbor Table:
1. Connect your computer to the same network as the switch.
You can use a WiFi or wired connection to connect your computer to the network, or
connect directly to a switch that is off-network using an Ethernet cable.
2. Launch a web browser.
3. In the address field of your web browser, enter the IP address of the switch.
If you do not know the IP address of the switch, see Change the Default IP Address of the
Switch on page 10.
The login window opens.
4. Enter the switch’s password in the Password field.
The default password is password.
The System Information page displays.
5. Select Routing> IPv6 > Advanced > Neighbor Table.
ICMPv6 Neighbor Solicit Messages
Transmitted
The number of ICMP Neighbor Solicitation messages sent by the
interface.
ICMPv6 Neighbor Advertisement
Messages Transmitted
The number of ICMP Neighbor Advertisement messages sent by the
interface.
ICMPv6 Redirect Messages
Transmitted
The number of Redirect messages sent.
ICMPv6 Group Membership Query
Messages Transmitted
The number of ICMPv6 Group Membership Query messages sent.
ICMPv6 Group Membership
Response Messages Transmitted
The number of ICMPv6 Group Membership Response messages sent.
ICMPv6 Group Membership
Reduction Messages Transmitted
The number of ICMPv6 Group Membership Reduction messages sent.
ICMPv6 Duplicate Address Detects The number of duplicate addresses detected by the interface.
Table 59. ICMPv6 Statistics information (continued)
Field Description
To Next Page
Loading...
