NETGEAR XS708T - Traffic Control Settings; Quality of Service Settings

Specifications and Default Settings
440
XS708T, XS712Tv2, and XS716T Smart Managed Pro Switch User Manual
Traffic Control Settings
The following table describes the traffic control settings.
Quality of Service Settings
The following table describes the Quality of Service settings.
802.1D spanning tree 1 Disabled
802.1w RSTP 1 Enabled
802.1s spanning tree 4 instances Disabled
Static 802.1Q tagging 256 VID = 1
Max member ports are equal to
the number of ports on the switch
Learning process Supports static and dynamic MAC
entries
Dynamic learning is enabled by
default
Table 99. Traffic control settings
Feature Sets Supported Default
Storm control All ports Disabled
Jumbo frame All ports Disabled
Max = 9216 bytes
Table 100. Quality of Service settings
Feature Sets Supported Default
Number of queues 8 N/A
802.1p 1 Enabled
DSCP 1 Disabled
Egress Rate limiting All ports Disabled
Table 98. Port characteristics (continued)
Feature Sets Supported Default