Manage Device Security
289
XS708T, XS712Tv2, and XS716T Smart Managed Pro Switch User Manual
6. In the Access Profile Name field, enter the name of the access profile to be added.
The maximum length is 32 characters.
7. Select one of the following check boxes:
• Activate Profile. Activate an access profile.
• Deactivate Profile. Deactivate an access profile.
• Remove Profile. Remove an access profile. The access profile must be deactivated
before you remove the access profile.
The Packets Filtered field displays the number of packets filtered.
8. Click the Apply button.
The updated configuration is sent to the switch. Configuration changes take effect
immediately.
9. To refresh the page with the latest information about the switch, click the Update button.
The following table describes the nonconfigurable data that is displayed.
Table 75. Access profile configuration profile summary
Field Description
Rule Type The action performed when the rules are matched.
Service Type The service type chosen. The policy is restricted by the service type chosen.
Source IP Address Source IP address of the client originating the management traffic.
Mask The subnet mask of the IP Address.
Priority The priority of the rule.