NETGEAR XS708T User Manual

Manage Device Security
294
XS708T, XS712Tv2, and XS716T Smart Managed Pro Switch User Manual
- Unauthorized. The system denies the selected interface system access by
moving the interface into unauthorized state. The switch cannot provide
authentication services to the client through the interface.
- MAC based. This mode allows multiple supplicants connected to the same port to
each authenticate individually. Each host connected to the port must authenticate
separately in order to gain access to the network. The hosts are distinguished by
their MAC addresses.
• Guest VLAN ID. Specify the VLAN ID for the guest VLAN. The valid range is 0–4093.
The default value is 0. Enter 0 to reset the guest VLAN ID on the interface. The guest
VLAN allows the port to provide a distinguished service to unauthenticated users,
after three authentication failures. This feature provides a mechanism to allow users
access to hosts on the guest VLAN.
• Guest VLAN Period. Specify the number of seconds that the selected port remains in
the quiet state following a failed authentication exchange. The guest VLAN time-out
must be a value in the range of 1–300. The default value is 90.
• Unauthenticated VLAN ID. Specify the VLAN ID of the unauthenticated VLAN for the
selected port. The valid range is 0–3965. The default value is 0. Hosts that fail the
authentication might be denied access to the network or placed on a VLAN created
for unauthenticated clients. This VLAN might be configured with limited network
access.
• Periodic Reauthentication. Select Enable to allow periodic reauthentication of the
supplicant for the specified port.
• Reauthentication Period. Specify the time, in seconds, after which reauthentication
of the supplicant occurs. The reauthentication period must be a value in the range of
1–65535. The default value is 3600. If this field is disabled, connected clients are not
forced to reauthenticate periodically.
• Quiet Period. Specify the number of seconds that the port remains in the quiet state
following a failed authentication exchange. While in the quite state, the port does not
attempt to acquire a supplicant.
• Resending EAP. Specify the EAP retransmit period for the selected port. The
transmit period is the value, in seconds, after which an EAPoL EAP Request/Identify
frame is resent to the supplicant.
• Max EAP Requests. Specify the maximum number of EAP requests for the selected
port. The value is the maximum number of times an EAPoL EAP Request/Identity
message is retransmitted before the supplicant times out.
• Supplicant Timeout. Specify the supplicant time-out for the selected port. The
supplicant time-out is the value, in seconds, after which the supplicant times out.
• Server Timeout. Specify the time that elapses before the switch resends a request to
the authentication server.
8. Click the Apply button.
The updated configuration is sent to the switch. Configuration changes take effect
immediately.

NETGEAR XS708T Specifications

General

Switch type	Managed
Switch layer	L2+/L3
Quality of Service (QoS) support	Yes
USB 2.0 ports quantity	1
SFP+ module slots quantity	2
Installed SFP modules quantity	-
Basic switching RJ-45 Ethernet ports type	10G Ethernet (100/1000/10000)
Basic switching RJ-45 Ethernet ports quantity	8
Certification	CE, FCC Cl. A, VCCI Cl. A, Cl. A EN 55022 (CISPR 22), Cl. A C-Tick, EN 55024, CCC
Product color	Black
LED indicators	Activity, Link, Power
Number of fans	1 fan(s)
Number of VLANs	256
Networking standards	IEEE 802.1D, IEEE 802.1Q, IEEE 802.1ab, IEEE 802.1p, IEEE 802.1s, IEEE 802.1w, IEEE 802.1x, IEEE 802.3, IEEE 802.3ad, IEEE 802.3ae, IEEE 802.3an, IEEE 802.3az, IEEE 802.3u, IEEE 802.3x, IEEE 802.3z
Virtual LAN features	Private VLAN, Protocol-based VLAN
Cable types supported	Cat5e, Cat6, Cat6a, Cat7
Copper ethernet cabling technology	10GBASE-T
Noise level	29.1 dB
Flash memory	256 MB
Internal memory	512 MB
Processor frequency	600 MHz
Mean time between failures (MTBF)	276832 h
Jumbo frames	9000
Latency (10 Gbps)	3.012 µs
MAC address table	16000 entries
Packet buffer memory	2 MB
Number of static routes	32
DHCP features	DHCP server, DHCP client
Security algorithms	802.1x RADIUS
Access Control List (ACL) rules	100
AC input voltage	100 - 240 V
AC input frequency	50 - 60 Hz
Power consumption (max)	96 W
Operating altitude	0 - 3000 m
Operating temperature (T-T)	0 - 50 °C
Operating relative humidity (H-H)	0 - 90 %
Cables included	AC

Weight and Dimensions

Depth	204 mm
Width	440 mm
Height	43 mm
Weight	2980 g