Manage Device Security
311
XS708T, XS712Tv2, and XS716T Smart Managed Pro Switch User Manual
6. From the Primary VLAN menu, select the primary VLAN ID of the domain.
7. In the Secondary VLAN(s) field, enter the VLAN that you want to associate with the
primary VLAN.
8. Click the Apply button.
The updated configuration is sent to the switch. Configuration changes take effect
immediately.
The following table describes the nonconfigurable information displayed on the page.
Configure the Private VLAN Port Mode
To configure the private VLAN port mode:
1. Connect your computer to the same network as the switch.
You can use a WiFi or wired connection to connect your computer to the network, or
connect directly to a switch that is off-network using an Ethernet cable.
2. Launch a web browser.
3. In the address field of your web browser, enter the IP address of the switch.
If you do not know the IP address of the switch, see Change the Default IP Address of the
Switch on page 10.
The login window opens.
4. Enter the switch’s password in the Password field.
The default password is password.
The System Information page displays.
5. Select Security > Traffic Control > Private VLAN > Private VLAN Port Mode
Configuration.
Table 81. Private VLAN Association information
Field Description
Isolated VLAN The isolated VLAN associated with the selected primary VLAN.
Community VLAN(s) The list of community VLANs associated with the selected primary VLAN.
To Next Page
Loading...
