To Next PageTo Next PageTo Previous PageTo Previous Page
Loading...
Need help?Do you have a question about the NETGEAR XS708T and is the answer not in the manual?
General| Switch type | Managed |
|---|---|
| Switch layer | L2+/L3 |
| Quality of Service (QoS) support | Yes |
| USB 2.0 ports quantity | 1 |
| SFP+ module slots quantity | 2 |
| Installed SFP modules quantity | - |
| Basic switching RJ-45 Ethernet ports type | 10G Ethernet (100/1000/10000) |
| Basic switching RJ-45 Ethernet ports quantity | 8 |
| Certification | CE, FCC Cl. A, VCCI Cl. A, Cl. A EN 55022 (CISPR 22), Cl. A C-Tick, EN 55024, CCC |
| Product color | Black |
| LED indicators | Activity, Link, Power |
| Number of fans | 1 fan(s) |
| Number of VLANs | 256 |
| Networking standards | IEEE 802.1D, IEEE 802.1Q, IEEE 802.1ab, IEEE 802.1p, IEEE 802.1s, IEEE 802.1w, IEEE 802.1x, IEEE 802.3, IEEE 802.3ad, IEEE 802.3ae, IEEE 802.3an, IEEE 802.3az, IEEE 802.3u, IEEE 802.3x, IEEE 802.3z |
| Virtual LAN features | Private VLAN, Protocol-based VLAN |
| Cable types supported | Cat5e, Cat6, Cat6a, Cat7 |
| Copper ethernet cabling technology | 10GBASE-T |
| Noise level | 29.1 dB |
| Flash memory | 256 MB |
| Internal memory | 512 MB |
| Processor frequency | 600 MHz |
| Mean time between failures (MTBF) | 276832 h |
| Jumbo frames | 9000 |
| Latency (10 Gbps) | 3.012 µs |
| MAC address table | 16000 entries |
| Packet buffer memory | 2 MB |
| Number of static routes | 32 |
| DHCP features | DHCP server, DHCP client |
| Security algorithms | 802.1x RADIUS |
| Access Control List (ACL) rules | 100 |
| AC input voltage | 100 - 240 V |
| AC input frequency | 50 - 60 Hz |
| Power consumption (max) | 96 W |
| Operating altitude | 0 - 3000 m |
| Operating temperature (T-T) | 0 - 50 °C |
| Operating relative humidity (H-H) | 0 - 90 % |
| Cables included | AC |
Weight and Dimensions| Depth | 204 mm |
|---|---|
| Width | 440 mm |
| Height | 43 mm |
| Weight | 2980 g |
