Nokia 7705 SAR - Page 213

Interface Configuration Guide 7705 SAR Interfaces
Edition: 01 3HE 11011 AAAC TQZZA 213
exit
endpoint "Y" create
exit
sap aps-1.1.1.1.1 endpoint "X" create
description "Default sap description for service id 1"
cem
local-ecid 1
remote-ecid 2
remote-mac 00:00:00:00:00:02
exit
exit
spoke-sdp 2003:1 endpoint "Y" create
exit
spoke-sdp 2004:1001 endpoint "X" icb create
exit
spoke-sdp 2004:2001 endpoint "Y" icb create
exit
no shutdown
exit
----------------------------------------------
The following CLI syntax shows examples of typical configurations of SC-APS and
MC-APS on MC-MLPPP access ports on a 4-port OC3/STM1 / 1-port OC12/STM4
Adapter card.
SC-APS node:
===================
port bpgrp-ppp-1
multilink-bundle
working-bundle bundle-ppp-1/5.1
protect-bundle bundle-ppp-1/6.1
exit
exit
port aps-1
aps
working-circuit 1/5/1
protect-circuit 1/6/4
exit
sonet-sdh
path sts1-1
no shutdown
exit
path vt15-1.1.1
no shutdown
exit
path vt15-1.1.2
no shutdown
exit
path vt15-1.1.3
no shutdown
exit
path vt15-1.1.4
no shutdown
exit
path vt15-1.2.1