7705 SAR Interfaces
224
Interface Configuration Guide
3HE 11011 AAAC TQZZA Edition: 01
no window-size
dot1q-etype 0x0600..0xffff
dot1x
[no] mac-auth
mac-auth-wait seconds
no mac-auth-wait
[no] max-auth-req max-auth-request
[no] port-control {auto | force-auth |
force-unauth}
[no] quiet-period seconds
[no] radius-plcy name
[no] re-auth-period seconds
[no] re-authentication
[no] server-timeout seconds
[no] supplicant-timeout seconds
[no] transmit-period seconds
down-when-looped
[no] keep-alive timer
[no] retry-timeout timer
[no] shutdown
[no] use-broadcast-address
duplex {full|half}
efm-oam
[no] accept-remote-loopback
mode {active|passive}
[no]shutdown
[no]transmit-interval interval [multiplier
multiplier]
[no]tunneling
egress-rate sub-rate [include-fcs]
[allow-eth-bn-rate-changes] [hold-time
hold-time]
encap-type {dot1q|null|qinq}
hold-time hold-time [up hold-time-up | down
hold-time-down]
ingress-rate ingress-rate cbs {size [bytes |
kilobytes] | default}
no ingress-rate
src-pause
no src-pause
lacp-tunnel
lldp
dest-mac
loopback {line | internal} {timer {0 | 30..86400} |
persistent} [swap-src-dst-mac]
no loopback
mac ieee-address
mode {access | network | hybrid}
mtu mtu-bytes