Nokia 7705 SAR - Page 225

Interface Configuration Guide 7705 SAR Interfaces
Edition: 01 3HE 11011 AAAC TQZZA 225
network
accounting-policy policy-id
[no] collect-stats
queue-policy name
scheduler-mode {profile | 4-priority |
16-priority}
phy-tx-clock {auto-pref-master | auto-pref-slave |
slave | master}
no phy-tx-clock
poe {plus}
no poe
ptp-asymmetry nano-seconds
no ptp-asymmetry
qinq-etype 0x0600..0xffff
report-alarm [signal-fail] [remote] [local]
[no-frame-lock] [high-ber]
speed {10|100|1000}
ssm
code-type {sonet | sdh}
[no] shutdown
[no] tx-dus
vlan-filter filter-id
no vlan-filter
xgig {lan | wan}
xor-mode {rj45 | sfp}
3.11.2.3.1 Configuring an Ethernet Network Port
A network port is network facing and participates in the service provider transport or
infrastructure network processes.
Use the following basic CLI syntax to configure Ethernet network mode port
parameters.
CLI Syntax: port port-id
ethernet
mode {network}
network
accounting-policy policy-id
[no] collect-stats
queue-policy name
scheduler-mode {profile | 4-priority |
16-priority}
The following CLI syntax shows an example of configuring an Ethernet port for
network mode.