Nokia 7705 SAR - Page 268

7705 SAR Interfaces
268
Interface Configuration Guide
3HE 11011 AAAC TQZZA Edition: 01
encap-type
{atm|bcp-null|bcp-dot1q|ipcp|
ppp-auto|frame-relay|wan-mirror
|cisco-hdlc|cem|hdlc}
frame-relay
lmi-type {ansi | itu | none |
rev1}
mode {dce | dte | bidir}
n393dce count
n393dte count
n391dte intervals
n392dce threshold
n392dte threshold
t391dte keepalive
t392dce keepalive
mode access
no shutdown
exit
no shutdown
exit
exit
no shutdown
Use the config port info detail command to display port configuration information:
*A:ALU-A>config>port# info detail
----------------------------------------------
description "DS1/E1"
tdm
e1
shutdown
framing g704
no loopback
clock-source node-timed
no signal-mode
report-alarm ais los
no report-alarm oof rai looped ber-sd ber-sf
no hold-time
ssm
shutdown
ssm-bit 8
no tx-dus
channel-group 1
shutdown
description "E1"
mode access
encap-type frame-relay
no mtu
network
queue-policy "default"
exit
timeslots 2-32
crc 16
frame-relay