Nokia 7705 SAR - Page 270

7705 SAR Interfaces
270
Interface Configuration Guide
3HE 11011 AAAC TQZZA Edition: 01
n393dce count
n393dte count
n391dte intervals
n392dce threshold
n392dte threshold
t391dte keepalive
t392dce keepalive
no shutdown
exit
no shutdown
exit
exit
no shutdown
Use the following CLI syntax to configure frame relay parameters for V.35 serial
ports. X.21 ports at super-rate speeds are also supported.
CLI Syntax: port port-id
serial
v35
channel-group channel-group-id
encap-type {cem | frame-relay | ipcp |
hdlc | cisco-hdlc}
mode access
frame-relay
lmi-type {ansi | itu | none | rev1}
mode {dce | dte | bidir}
n393dce count
n393dte count
n391dte intervals
n392dce threshold
n392dte threshold
t391dte keepalive
t392dce keepalive
no shutdown
exit
no shutdown
exit
exit
no shutdown