7705 SAR Interfaces
312
Interface Configuration Guide
3HE 11011 AAAC TQZZA Edition: 01
The operational state of the entity is disabled as well as the operational state of any entities
contained within. Many objects must be shut down before they can be deleted.
When used with the ethernet>efm-oam command, shutdown enables tunneling on the port
(see tunneling), and no shutdown enables Ethernet EFM OAM 802.3ah.
The no form of this command administratively enables an entity.
Default card – no shutdown
dsl – no shutdown
mda – no shutdown
port – shutdown
scada – shutdown
scada>branch – no shutdown
input – no shutdown (for Auxiliary Alarm card and chassis alarm inputs)
alarm – shutdown (for Auxiliary Alarm card)
output – shutdown (for Auxiliary Alarm card)
lag – shutdown
Note: The config>port>shutdown command does not remove power on ports that are
Power over Ethernet (PoE/PoE+) capable. You must use the config>port>ethernet>no
poe command to turn the power off; see poe for more information.
To Next Page
Loading...
