7705 SAR Interfaces
326
Interface Configuration Guide
3HE 11011 AAAC TQZZA Edition: 01
Default 1
Parameters fabric-policy-id — an existing fabric policy ID
Values 1 to 256
queue-policy
Syntax queue-policy name
no queue-policy
Context config>card>mda>network>ingress
Description This command specifies the network ingress queue policy that defines queue parameters
such as CBS, high-priority-only burst size, MBS, CIR, and PIR rates, as well as forwarding
class-to-queue mappings. The network queue policy is defined in the config>qos>network-
queue context. Refer to the 7705 SAR Quality of Service Guide, “Network Queue QoS
Policies”, for more information.
The no form of this command reverts to the default.
Default “default”
Parameters name — specifies an existing network queue policy name
security-queue-policy
Syntax security-queue-policy policy-id
no security-queue-policy
Context config>card>mda>access>ingress
config>card>mda>network>ingress
Description This command applies an existing security queue policy, in either an access or network
context, to the specified adapter card.
The no form of this command sets the policy-id back to the default.
Default 1
Parameters policy-id — specifies an existing security queue policy ID
Values 1 to 65535
To Next Page
Loading...
