Interface Configuration Guide 7705 SAR Interfaces
Edition: 01 3HE 11011 AAAC TQZZA 329
Default n/a
security-aggregate-rate
Syntax security-aggregate-rate agg-rate
no security-aggregate-rate
Context config>card>mda>spt
config>system>spt
Description This command configures the fabric aggregate rate for security queues on the datapath. The
command is configured in the config>card>mda>spt context for the 7705 SAR-8,
7705 SAR-18, and 7705 SAR-X, and in the config>system>spt context for the
7705 SAR-Hc, 7705 SAR-H, and 7705 SAR-Wx.
Parameters agg-rate — specifies the aggregate rate for security queues, in kilobits per second
Values 1 to 10000000 | maximum
Default 50000
To Next Page
Loading...
