7705 SAR Interfaces
382
Interface Configuration Guide
3HE 11011 AAAC TQZZA Edition: 01
xor-mode
Syntax xor-mode {rj45 | rjp5 | sfp}
Context config>port>ethernet
Description This command configures the operational mode of Ethernet XOR combination ports. Ethernet
XOR ports on the 7705 SAR-A, 7705 SAR-Ax, 7705 SAR-H, and 7705 SAR-X can be
configured to operate as either RJ-45 ports or SFP ports. Ethernet XOR ports on the 6-port
SAR-M Ethernet module can be configured to operate as either RJ point five ports or SFP
ports. The mode can be configured on each port independently. Refer to the individual
hardware installation guides for more information.
Default rj45 (for applicable 7705 SAR chassis); rjp5 (for 6-port SAR-M Ethernet module)
Parameters rj45 — specifies that the port operate as a 10/100/1000Base-T electrical RJ-45 port
(applicable 7705 SAR chassis only)
rjp5 — specifies that the port operate as a 10/100/1000Base-T electrical RJ point five
port (6-port SAR-M Ethernet module only)
sfp — specifies that the port operate as an SFP port
To Next Page
Loading...
