7705 SAR Interfaces
392
Interface Configuration Guide
3HE 11011 AAAC TQZZA Edition: 01
Parameters seconds — specifies the server timeout period in seconds
Values 1 to 300
supplicant-timeout
Syntax supplicant-timeout seconds
no supplicant-timeout
Context config>port>ethernet>dot1x
Description This command configures the time the 7705 SAR waits for a client to respond to its EAPOL
messages. When the supplicant timeout period expires, the 802.1x authentication session is
considered to have failed.
The no form of this command returns the value to the default.
Default 30
Parameters seconds — specifies the supplicant timeout period in seconds
Values 1 to 300
transmit-period
Syntax transmit-period seconds
no transmit-period
Context config>port>ethernet>dot1x
Description This command configures the time after which the 7705 SAR sends a new EAPOL request
message.
The no form of this command returns the value to the default.
Default 30
Parameters seconds — specifies the server transmit period in seconds
Values 1 to 3600