Interface Configuration Guide 7705 SAR Interfaces
Edition: 01 3HE 11011 AAAC TQZZA 391
Default 3600
Parameters seconds — specifies the reauthentication delay period in seconds
Values 1 to 9000
re-authentication
Syntax [no] re-authentication
Context config>port>ethernet>dot1x
Description This command enables or disables periodic 802.1x reauthentication.
When reauthentication is enabled, the 7705 SAR will reauthenticate clients on the port after
waiting the number of seconds defined by the re-auth-period command.
The no form of this command disables 802.1x reauthentication.
Default no re-authentication
server-timeout
Syntax server-timeout seconds
no server-timeout
Context config>port>ethernet>dot1x
Description This command configures the time during which the 7705 SAR waits for the RADIUS server
to respond to its access request message. When this timer expires, the 7705 SAR will resend
the access request message, up to the number of times specified by the max-auth-req
command.
The no form of this command returns the value to the default.
Default 30
To Next Page
Loading...
