Interface Configuration Guide 7705 SAR Interfaces
Edition: 01 3HE 11011 AAAC TQZZA 407
Parameters on — monitoring is enabled on the lead
off — monitoring is disabled on the lead
rdl-ri
Syntax rdl-ri {on | off}
Context config>port>serial>rs232>control-lead>monitor
Description This command enables monitoring on the Remote Digital Loopback (RDL) or Ring Indicator
(RI) input control lead. For a DCE device, the input control lead is RDL. For a DTE device,
the input control lead is RI.
This command is valid only for an RS-232 interface.
Default off
Parameters on — monitoring is enabled on the lead
off — monitoring is disabled on the lead
rts-dcd
Syntax rts-dcd {on | off}
Context config>port>serial>rs232>control-lead>monitor
config>port>serial>v35>control-lead>monitor
Description This command enables monitoring on the Request To Send (RTS) or Data Carrier Detect
(DCD) input control lead. For a DCE device, the input control lead is RTS. For a DTE device,
the input control lead is DCD.
This command is valid only for RS-232 and V.35 interfaces.
Default off
Parameters on — monitoring is enabled on the lead
off — monitoring is disabled on the lead
To Next Page
Loading...
