7705 SAR Interfaces
450
Interface Configuration Guide
3HE 11011 AAAC TQZZA Edition: 01
mlppp
Syntax mlppp
Context config>port>multilink-bundle
Description This command enables the context to configure MLPPP bundle attributes.
endpoint-discriminator
Syntax endpoint-discriminator class {ip-address | global-mac-address | null} [discriminator-id
discriminator-id]
no endpoint-discriminator
Context config>port>multilink-bundle>mlppp
Description This command configures the endpoint-discriminator class and ID. The port must be shut
down to modify the endpoint-discriminator parameters.
If the null option is configured, the 7705 SAR will advertise an endpoint-discriminator class
value of NULL in link membership negotiations. If the far-end node rejects the NULL object,
the 7705 SAR will remove the object from future requests. The null option should only be
used if the far-end node cannot support the ip-address or global-mac-address endpoint-
discriminator class options, as these options provide more protection from incorrectly adding
a link to an MLPPP bundle.
The no form of this command removes the configured parameters.
Parameters class — specifies the link control protocol endpoint-discriminator class field
Default global-mac-address (for physical MLPPP bundle)
ip-address (for physical MLPPP bundle protection group)
T1/E1 ports on the 7705 SAR-M (variants with
T1/E1 ports)
1 to 8 1 to 16 1 to 16
T1/E1 ports on the 7705 SAR-X 1 to 8 1 to 8 —
T1/E1 ports on the 4-port T1/E1 and RS-232
Combination module (on 7705 SAR-H)
1 to 2 1 to 2 —
DS1/E1 channels on the 2-port OC3/STM1
Channelized Adapter card
1 to 8 1 to 8 1 to 8
4-port OC3/STM1 / 1-port OC12/STM4
Adapter card
— 1 to 8 —
16-port T1/E1 ASAP Adapter card 1 to 8 1 to 16 1 to 16
32-port T1/E1 ASAP Adapter card 1 to 8 1 to 16 1 to 16
MLPP Bundles IMA Bundles
Access Network Access
To Next Page
Loading...
