7705 SAR Interfaces
460
Interface Configuration Guide
3HE 11011 AAAC TQZZA Edition: 01
codir
Syntax [no] codir
Context config>port>tdm
Description This command creates a 64 kb/s codirectional G.703 channel on a port on the 8-port Voice
& Teleprotection card.
The no form of this command deletes the port’s codirectional channel.
Default n/a
channel-group
Syntax [no] channel-group channel-group-id
Context config>port>tdm>codir
config>port>tdm>tpif
Description This command creates a DS0 channel group on a TDM interface on the 8-port Voice &
Teleprotection card.
The no form of this command deletes the port’s codirectional or TPIF channel group.
Default n/a
Parameters channel-group-id — specifies the channel group ID number
Values 1
encap-type
Syntax encap-type cem
Context config>port>tdm>codir>channel-group
config>port>tdm>tpif>channel-group
Description This command specifies the encapsulation type. The channel group must be deleted before
changing the encapsulation type.
Default no encap-type
Parameters cem — circuit emulation (TDM)