Nokia 7705 SAR - Page 482

7705 SAR Interfaces
482
Interface Configuration Guide
3HE 11011 AAAC TQZZA Edition: 01
ppp
Syntax [no] ppp
Context config>port>tdm>ds1>channel-group
config>port>tdm>e1>channel-group
Description This command enables access to the context to configure the LCP operational parameters
for a DS1 or E1 channel or a DS0 channel.
The no form of the command removes the LCP operational parameters.
Default no ppp
ber-sf-link-down
Syntax ber-sf-link-down
no ber-sf-link-down
Context config>port>tdm>ds1>channel-group>ppp
config>port>tdm>e1>channel-group>ppp
Description This command enables the channel-group down on BER-SF alarm.When enabled, the
channel-group will be placed out of service once BER-SF is detected.
The no form of this command disables the feature.
Default no ber-sf-link-down
keepalive
Syntax keepalive time-interval [dropcount drop-count]
no keepalive
Context config>port>tdm>ds1>channel-group>ppp
config>port>tdm>e1>channel-group>ppp
Description This command sets the keepalive interval.
The no form of this command returns the interval to the default value.
Default keepalive 10 dropcount 3
Parameters time-interval — the time in seconds between keepalive messages, expressed as a
decimal integer
Values 1 to 60