Interface Configuration Guide 7705 SAR Interfaces
Edition: 01 3HE 11011 AAAC TQZZA 535
Output Example
The following examples display the card states for a 7705 SAR-8, 7705 SAR-18,
7705 SAR-M, 7705 SAR-H, 7705 SAR-Hc, 7705 SAR-A, 7705 SAR-Ax, 7705 SAR-W,
7705 SAR-Wx, and 7705 SAR-X.
Table 32 Show Card Output Fields
Label Description
Slot The slot number of the card in the chassis
Provisioned Type The card type that is configured for the slot
Equipped Type (if different) The card type that is actually populated in the slot if
different from the provisioned type
Admin State up: the card is administratively up
down: the card is administratively down
Operational State up: the card is operationally up
down: the card is operationally down
active: the CSM is in active mode (for redundancy)
standby: the CSM is in standby mode (for redundancy)
Comments Provides other information about the card
Note:
• The show card state command output for the 7705 SAR-Hc, 7705 SAR-A,
7705 SAR-Ax, 7705 SAR-W, 7705 SAR-Wx, and 7705 SAR-X will always appear as
shown because these platforms have a fixed physical configuration.
• The show card state command output for the 7705 SAR-M (all variants) will always
appear as shown, with the exception of slot 1/3, where the provisioned type depends
on the module installed in those variants with module slots.
• The show card state command output for the 7705 SAR-H will always appear as
shown, with the exception of slots 1/2 and 1/3, where the provisioned type depends on
the module installed in those slots.
To Next Page
Loading...
