Nokia 7705 SAR - Page 534

7705 SAR Interfaces
534
Interface Configuration Guide
3HE 11011 AAAC TQZZA Edition: 01
3.14.2.1.2 Show Card Commands
card
Syntax card [slot-number] [detail]
card state
Context show
Description This command displays IOM and CSM information for the chassis.
Default displays summary information only
Parameters slot-number — displays information for the specified card slot (always 1)
Values 1
state — displays provisioned and equipped card, adapter card, and module information
detail — displays detailed IOM information if used with the card slot-number option and
displays detailed IOM and CSM card information if used without the slot-number
option
Output The following outputs are examples of card information:
• Card (Output Example, Table 32)
• Card State (Output Example, Table 33)
• Card Detailed (Output Example, Table 34)
•CSM Card (Output Example, Table 35)
Output Example
ALU-1# show card
===============================================================================
Card Summary
===============================================================================
Slot Provisioned Type Admin Operational Comments
Equipped Type (if different) State State
-------------------------------------------------------------------------------
1 iom-sar up up
A csmv2-10g up up/active
B csmv2-10g up down/standby
===============================================================================