7705 SAR Interfaces
728
Interface Configuration Guide
3HE 11011 AAAC TQZZA Edition: 01
Serial Socket
Description The configured port type
Interface The interface ID displayed in the format
slot/mda/port.channel
Admin Status The administrative status of the port, either up or down
Oper status The operational status of the port, either up or down
Last State Change The last time the operational status of the channel
changed state
Socket IfIndex The socket index number
Configured mode The port mode (serial raw sockets support access mode
only)
Encap Type The encapsulation type of the port (serial raw sockets
support encapsulation type raw only)
Physical Link Indicates whether a physical link is present
EOP Length The number of characters (in bytes) that trigger sending
an IP transport packet when end of packet is declared
Squelch Delay Indicates whether squelch delay is enabled or disabled
EOP Idle Timeout The limit, in milliseconds, that a queued packet can
remain idle before an end of packet is declare
Unsquelch Delay Indicates whether unsquelch delay is enabled or disabled
EOP Special Char Indicates whether the sending of a special character that
declares end of packet is enabled or disabled
Inter-Session Delay The time delay, in milliseconds, between transmission of
a session’s data over a serial port and the transmission
of the next queued session’s data
Squelch Status Indicates whether squelch is enabled (on) or disabled
(off)
Socket Statistics
Characters received The number of data characters received
Characters transmitted The number of data characters sent
End of packet idle timeout The number of times that end of packet has been
declared due to an EOP idle timeout
Table 74 Show Port Serial Channel Output Fields (Continued)
Label Description
To Next Page
Loading...
