Interface Configuration Guide 7705 SAR Interfaces
Edition: 01 3HE 11011 AAAC TQZZA 727
Traffic Statistics
Octets Input/Output The total number of octets received and transmitted on
the port
Packets Input/Output The number of packets, delivered by this sublayer to a
higher (sub) layer, which were not addressed to a
multicast or broadcast address at this sublayer. The total
number of packets that higher-level protocols requested
be transmitted, and which were not addressed to a
multicast or broadcast address at this sublayer, including
those that were discarded or not sent.
Errors Input/Output For packet-oriented interfaces, the number of inbound
packets that contained errors preventing them from being
deliverable to a higher-layer protocol. For character-
oriented or fixed-length interfaces, the number of inbound
transmission units that contained errors preventing them
from being deliverable to a higher-layer protocol.
For packet-oriented interfaces, the number of outbound
packets that could not be transmitted because of errors.
For character-oriented or fixed-length interfaces, the
number of outbound transmission units that could not be
transmitted because of errors.
Port Statistics
Packets Input/Output The number of packets, delivered by this sublayer to a
higher (sub) layer, which were not addressed to a
multicast or broadcast address at this sublayer. The total
number of packets that higher-level protocols requested
be transmitted, and which were not addressed to a
multicast or broadcast address at this sublayer, including
those that were discarded or not sent.
Discards Input/Output The number of inbound/outbound packets chosen to be
discarded to possibly free up buffer space
Unknown Proto Discards
Input/Output
For packet-oriented interfaces, the number of packets
received at the interface that were discarded because of
an unknown or unsupported protocol. For
character-oriented or fixed-length interfaces that support
protocol multiplexing, the number of transmission units
received at the interface that were discarded because of
an unknown or unsupported protocol. For any interface
that does not support protocol multiplexing, this counter
will always be 0.
Table 74 Show Port Serial Channel Output Fields (Continued)
Label Description
To Next Page
Loading...
