7705 SAR Interfaces
746
Interface Configuration Guide
3HE 11011 AAAC TQZZA Edition: 01
Table 78 Show Port Clear Channel DS3 Output Fields
Label Description
Description A text description of the port
Interface The port ID displayed in the format slot/mda/port
Port IfIndex The interface’s index number, which reflects its
initialization sequence
Admin Status Up: the port is administratively up
Down: the port is administratively down
Oper Status Up: the port is operationally up
Down: the port is operationally down
Physical Link Yes: a physical link is present
No: a physical link is not present
Type The type of interface
Buildout The line buildout (cable length) for the DS3 physical
interface
Hardware Address The port’s hardware address
Port Statistics
Packets Input/Output The number of packets, delivered by this sublayer to a
higher (sub) layer, which were not addressed to a
multicast or broadcast address at this sublayer. The total
number of packets that higher-level protocols requested
be transmitted, and which were not addressed to a
multicast or broadcast address at this sublayer, including
those that were discarded or not sent.
Discards Input/Output The number of inbound/outbound packets chosen to be
discarded to possibly free up buffer space
Unknown proto discards
Input/Output
For packet-oriented interfaces, the number of packets
received via the interface that were discarded because of
an unknown or unsupported protocol. For character-
oriented or fixed-length interfaces that support protocol
multiplexing, the number of transmission units received
via the interface that were discarded because of an
unknown or unsupported protocol. For any interface that
does not support protocol multiplexing, this counter will
always be 0. For ATM, this field displays cells discarded
on an invalid vpi/vci. Unknown proto discards do not
show up in the packet counts.
To Next Page
Loading...
