Interface Configuration Guide 7705 SAR Interfaces
Edition: 01 3HE 11011 AAAC TQZZA 813
Output Example
*A:ALU-1># show multilink-bundle type ima-grp
===============================================================================
Bundle Summary
===============================================================================
Bundle Type Admin Oper Port Min Total/
Id State State State Links Active Links
-------------------------------------------------------------------------------
bundle-ima-1/6.3 ima-grp Down Down Ghost 1 0/0
-------------------------------------------------------------------------------
Bundles : 1
===============================================================================
*A:ALU-1>#
*A:ALU-1># show multilink-bundle bundle-ima-1/6.3
===============================================================================
Bundle Summary
===============================================================================
Bundle Type Admin Oper Port Min Total/
Port State The state level of the port:
none: the port is either in its initial creation state or is just
about to be deleted
ghost: no member links are configured as part of this
bundle
down: all member links are in “none”, “ghost”, or “down”
state
linkUp: at least one member link is in port state “link up”
but the bundle protocol is not yet operationally up (due to
the bundle protocol still coming up; for example, due to
insufficient number of member links in “link up” state yet
or to bundle being shut down)
Up: the bundle is ready to pass some kinds of traffic as
the bundle protocol has come up (at least “minimum
links” member links are in the port state up and the
bundle protocol is up)
Min Links The minimum number of links that must be active for a
bundle to be active. If the number of links drop below the
given minimum, then the multilink bundle will transition to
an operation down state.
Total Links The total number active of member links configured for
this bundle
Active Links The total number of active links for the bundle
Table 109 Show Multilink Bundle Output Fields (Continued)
Label Description
To Next Page
Loading...
