7705 SAR Interfaces
826
Interface Configuration Guide
3HE 11011 AAAC TQZZA Edition: 01
3.14.2.1.10 Show ATM IMA Group Commands
multilink-bundle
Syntax multilink-bundle bundle-id ima atm [detail]
multilink-bundle bundle-id ima atm connections
multilink-bundle bundle-id ima atm pvc [vpi/vci] [detail]
multilink-bundle bundle-id ima atm pvp [vpi] [detail]
Context show
Description This command displays ATM port information for IMA group bundles. The information
displayed is equivalent to that displayed for the show port (atm) command.
Parameters bundle-id — specifies the IMA port ID
atm — displays ATM information
connections — displays ATM connection information
pvc — displays ATM port PVC information
pvp — displays ATM port PVP information
vpi/vci — displays the VPI/VCI values
Values vpi: 0 to 4095 (NNI)
0 to 255
vci: 1, 2, 5 to 65534
detail — provides detailed information
Output The following outputs are examples of IMA ATM information:
• Multilink Bundle IMA ATM (Output Example, Table 114)
• Multilink Bundle IMA ATM Connections (Output Example, Table 115)
• Multilink Bundle IMA ATM PVC (Output Example, Table 116)
• Multilink Bundle IMA ATM PVP (Output Example, Table 117)
Output Example
*A:ALU-1># show multilink-bundle bundle-ima-1/6.3 ima atm
=============================================================================
ATM Info for bundle-ima-1/6.3
=============================================================================
Cell Mode : UNI Mapping : n/a
Configured VCs : 0 Configured VPs : 0
Configured VTs : 0 Configured IFCs : 0
Configured minimum VPI: 0
Last Unknown VPI/VCI : none
===============================================================================
To Next Page
Loading...
