7705 SAR Interfaces
842
Interface Configuration Guide
3HE 11011 AAAC TQZZA Edition: 01
3.14.2.2.2 Fabric Profile Statistics Monitor Commands
fabric-profile
Syntax fabric-profile mda {mda-id | with-stats-enabled} {dest-mda | source-mda} [interval
seconds] [repeat repeat] [absolute | rate]
Context monitor
Description This command enables monitoring of adapter card fabric profile statistics. The specified
adapter card statistical information displays and automatically refreshes at the configured
interval.
Parameters mda-id — the slot number of the adapter card
with-stats-enabled — if used, this keyword replaces the mda-id parameter, in which
case the adapter card that has fabric-stats-enabled configured will be the one which
is monitored; that is, the command will be monitor fabric-profile mda with-stats-
enabled dest-mda | source-mda. If there are no adapter cards that have fabric-
stats-enabled configured, no statistics will be displayed.
dest-mda — displays network and access ingress statistics for all adapter cards going
towards the fabric and destined for the specific destination adapter card. The
following are also displayed: global fabric statistics, fabric firewall statistics, and the
fabric port statistics if the destination adapter card has the collection of fabric
statistics enabled. The sum of traffic forwarded or dropped is also displayed.
source-mda — displays network and access ingress traffic statistics from the specified
adapter card going towards the fabric and towards a destination adapter card. Fabric
firewall statistics and the sum of traffic forwarded or dropped are also displayed.
seconds — configures the interval for each display in seconds
Values 3 to 60
Default 10
repeat — configures how many times the command is repeated
Values 1 to 999
Default 10
absolute — displays the raw statistics without processing. No calculations are
performed on the delta or rate statistics.
rate — displays the rate per second for each statistic instead of the delta
To Next Page
Loading...
