45530603TH Rev.2
4-88
Oki Data CONFIDENTIAL
4. TROUBLESHOOTING PROCEDURE
(2) Print speed is slow.
Check item Check work
Actions to be taken
at NG
(1) Check the LINK lamp.
Check if the LINK
lamp (green) is
illuminating or not.
Check if the HUB and a printer are connected
normally.
Re-connect the
network cable
normally.
Confirm that the straight network cable is
being used.
Replace the
cable with the
straight cable.
Make an attempt to change connection of the
network cable to other port of a HUB.
Try to change the
HUB.
(2) Check the link status.
Print out the
network information
to check the link
status.
Check the speed of the printer and the hub
and also the communication mode.
When “Hub Link
Setting” is not set
to “Auto” and also
the hub setting
that matches the
baud rate and
communication
mode to those
of the printer
is "Auto-
negotiation," set
Duplex to "Half."
(3) Web page is displayed partially.
Check item Check work
Actions to be taken
at NG
(1) Check the settings.
Check the browser
settings.
Check that the web browser security is not set
to high.
When the web
browser security
is set to high,
click [Tools] -
[Internet Options]
- [Security] -
[Trusted sites] -
[Sites] and add
the URLs of this
printer server.
Alternative,
click [Tools] -
[Internet Options]
- [Security]
- [Internet] -
[Custom level]
and click Enable
for Active
Scripting.
To Next Page
Loading...
Need help?
General
