Oki C911 - Page 57

45530603TH Rev.2
4-12
Oki Data CONFIDENTIAL
4. TROUBLESHOOTING PROCEDURE
LCD Status Message
( represents a blank line.)
Online
indicator
Inspection
lamp
Details
Error
code
Change %MEDIA_
SIZE%
%MEDIA_TYPE% in
%TRAY%
Press OK Button
Please see HELP for
details
Off Blink Indicates disagreement between the
media type set to the tray and the print
data.
Prompts the user to load proper paper
in the tray. (It takes time until the statue
is cleared after the tray is closed and the
lever lifted.)
Error 661: Tray 1
Error 662: Tray 2
Error 663: Tray 3
Error 664: Tray 4
Error 665: Tray 5
The unit of paper size in the Custom
mode follows the unit for display (menu
setting) specified for MP Tray unless
otherwise specified by the driver.
If specified by the driver, paper size is
displayed in the unit specified by the
driver.
Paper size display in the Custom mode:
“<Width> x <Length> <unit>”
ex : 210 x 297 mm
8.5 x 11.0 inch
When the user presses the OK button,
the printer ignores the error only for this
job and performs printing.
If Media_Size covers both portrait and
landscape, %MEDIA_SIZE% additionally
shows an icon indicating the paper
orientation after the paper size.
Error
661
662
663
664
665
Spot Color Duct has
not been installed
Please install the
Spot Color Duct
Please see HELP for
details
Off Blink Indicates that no spot color duct is
installed.
Error
676
Spot Color settings
changes.
Shut down and
restart to enable new
settings.
Off Blink This status message is displayed when
the spot color setting is changed.
Error
677
LCD Status Message
( represents a blank line.)
Online
indicator
Inspection
lamp
Details
Error
code
Spot Color has been
replaced
Check Spot Color
menu settings.
Current setting is
%MENUCOLOR%.
Press OK Button
Off Blink When the color informed by PU is
unknown, CU prompts to check the menu
setting.
Error
678
Spot Color has been
replaced
Press OK to change
the Spot Color
settings in the menu
to %COLOR% and
restart the system.
If you do not want
to change settings,
return Spot Color
toner, image drum
and Spot Color
duct settings to
%MENUCOLOR%.
Off Blink If the color informed by PU doesn’t
match the menu setting, CU prompts for
approval to change the menu setting.
Error
679
Install %COLOR%
New Image Drum
Printing disabled due
to low threshold of
Image Drum life
Please see HELP for
details
Off Blink The extended service life of the image
drum has expired.
Error 6800: Yellow
Error 6801: Magenta
Error 6802: Cyan
Error 6803: Black
Error 6804: White
Error 6805: Clear
Error
6800
6801
6802
6803
6804
6805
Non Genuine Image
Drum
%COLOR%
Please see HELP for
details
Off Blink Indicates detection of an image drum not
suitable for this printer.
Error 6840: Yellow
Error 6841: Magenta
Error 6842: Cyan
Error 6843: Black
Error 6844: White
Error 6845: Clear
Error
6840
6841
6842
6843
6844
6845