Olympus RollerFORM User Manual

DMTA-20073-01EN, Rev. C, November 2015
Maintenance 113
4. Using the hexagonal key, loosen the rear roller’s retaining screw (see Figure 6-40
on page 113).
Figure 6-40 Loosening the rear roller’s retaining screw
5. Gently apply pressure to the rear roller’s axle on the end opposite the retaining
screw to free it from its seat in the RollerFORM frame (see Figure 6-41 on
page 114).

Olympus RollerFORM Specifications

General

Brand	Olympus
Model	RollerFORM
Category	Laboratory Equipment
Language	English