Olympus RollerFORM - Index

DMTA-20073-01EN, Rev. C, November 2015
Index 155
Index
A
acoustic wheel 22
bearing seal under C-clip, careful not to dam-
age 78, 81
components 19
flanges 20
liquid chamber 20
probe-axle 50, 77
stainless steel rings 20
tire 20
valves 20
couplant, application 49
fillup
deionized water 24, 41, 75
distilled water 24, 41, 75
noncorrosive glycol 24, 41, 75, 86
noncorrosive glycol, safety measures 9, 25,
40, 75
noncorrosive glycol, spill cleanup 40, 46
Propylene Glycol Dynalene PG 41, 75, 86
flanges See flanges
indicators
active aperture position 64
first to last element direction 64
installation 107
liquid chamber See liquid chamber
probe-axle See probe-axle
properly filled, measurement 46, 48
removal 71
tire See tire
active aperture position indicators 64
adaptors, LEMO/DE-15 connector 140
air bubbles
bubble trap 47, 48
degas liquid 25, 40, 43
removal 46, 47
scan, upside down 47
alternate encoder holder 118, 131
ancillary equipment 6
angle adjustment, probe See probe angle adjust-
ment knob
aperture position indicators, active 64
Australia, RCM compliance 3
axle
acoustic wheel See probe-axle
rear roller 113, 126
B
batteries, changing laser 135
bidirectional scan mode 32
See also unidirectional scan mode
scan overlap 35
bubbles, air See air bubbles
buttons
Indexer Clicker 19, 33
On/Off, laser guide 19
Start Acquisition 19, 36
C
cable sheath, securing 124
cable tie
cable sheath, installing 124
removal 111, 121
cables
LEMO
adaptor, OmniScan MX or TomoScan
FOCUS series 30, 140