Olympus RollerFORM User Manual

DMTA-20073-01EN, Rev. C, November 2015
Preparing for an Inspection 51
Figure 4-1 Adjusting the probe angle to optimize the signal
To rotate the probe-axle, always use the dedicated angle adjustment knob and never
use the probe cable. Using the probe cable could lead in probe cable damage.
4. Moving the knob up and down, adjust the angle of the probe so that the signal
appearing on the instrument’s display is at its peak value.

Olympus RollerFORM Specifications

General

Brand	Olympus
Model	RollerFORM
Category	Laboratory Equipment
Language	English