Specifications and Dimensions
FQ-CR2 User’s Manual
171
Appendices
10
Table 1
*1: Tolerance: ±10% max.
*2: Applicable standards: JIS C 6802:2005
Table 2
Indications Judgement results indicator (color: orange), ERROR indicator (color: red), and BUSY
indicator (color: green)
Ratings Power supply voltage 20.4 to 26.4 VDC (including ripple)
Insulation resistance Between all lead wires and case: 0.5 MΩ (at 250 V)
Current consumption 2.4 A max.
Environmental
immunity
Ambient tempera-
ture range
Operating: 0 to 50°C
Storage: −25 to 65°C
(with no icing or condensation)
Ambient humidity
range
Operating and storage: 35% to 85% (with no condensation)
Ambient atmosphere No corrosive gas
Vibration resistance
(destruction)
10 to 150 Hz, single amplitude: 0.35 mm, X/Y/Z directions
8 min each, 10 times
Shock resistance
(destruction)
150 m/s
2
3 times each in 6 direction (up, down, right, left, forward, and backward)
Degree of protection IEC 60529 IP67 (Except when Polarizing Filter Attachment is mounted.)
Materials Sensor: PBT, PC, SUS
Mounting Bracket: PBT
Polarizing Filter Attachment: PBT, PC
Ethernet connector: Oil-resistance vinyl compound
I/O connector: Lead-free heat-resistant PVC
Weight Depends on field of view and installation distance. Refer to Table 1.
Accessories Mounting Bracket (FQ-XL)(1)
Polarizing Filter Attachment (FQ-XF1) (1)
Instruction Manual
Quick Startup Guide
Member Registration Sheet
Warning Label
LED class
*2
Class 2
NPN PNP Field of view (H×V) *1 Installation distance Number of LEDs Weight
FQ-CR20010F-M FQ-CR25010F-M 7.5 × 4.7 to 13 × 8.2 mm 38 to 57 mm 4 200 g max.
FQ-CR20050F-M FQ-CR25050F-M 13 × 8.2 to 53 × 33 mm 56 to 215 mm 4
FQ-CR20100F-M FQ-CR25100F-M 53 × 33 to 240 × 153 mm 220 to 970 mm 8
FQ-CR20100N-M FQ-CR25100N-M 29 × 18 to 300 × 191 mm 32 to 380 mm 8
Item NPN PNP
Input specifi-
cations
ON: Shorted to 0 V, or 1.5 V max.
OFF: Open (leakage current: 0.1 mA max.)
ON: Shorted to power supply voltage, or power supply volt-
age −1.5 V max.
OFF: Open (leakage current: 0.1 mA max.)
Output speci-
fications
NPN open collector
30 VDC, 50 mA max., residual voltage: 1.2 V max.
PNP open collector
30 VDC, 50 mA max., residual voltage: 1.2 V max.
Item Fixed Mount 2D Code Reader
Sec10.fm 171 ページ ２０１１年７月８日 金曜日 午後８時５２分
To Next Page
Loading...
