Setting Up Ethernet
32
FQ-CR2 User’s Manual
3 Right-click the [Local Area Connection] Icon and select
[Properties].
4 On the [General] Tab Page, double-click Internet Proto-
col (TCP/IC).
5 Select the Use the following IP address Option and en-
ter the following IP address and subnet mask.
• IP address: 10.5.5.101
• Subnet mask: 255.255.255.0
6 Click the [OK] Button. This completes the settings.
FQ Sensor User Manual.book 32 ページ ２０１１年７月８日 金曜日 午後２時３０分
To Next Page
Loading...
