Opengear IM4200 User Manual

Console Server & Router User Manual 227
11.2 Upgrade Firmware
Before upgrading you should ascertain if you are already running the most current firmware in your gateway. Your console
server will not allow you to upgrade to the same or an earlier version.
 The Firmware version is displayed in the header of each page
 Alternately selecting Status: Support Report reports the Firmware Version
 To upgrade, you first must download the latest firmware image from ftp://ftp.opengear.com or
http://opengear.com/firmware/:
 For ACM5000 family download acm500x.flash
 For CM4116/4148 download cm41xx.flash
 For CM4008 download cm4008.flash
 For CM4001 download cm4001.flash
 For IM4216-34 and IM4208/16/32/48-2 download im42xx.flash
 For IM4004-5 download img4004.flash
 For SD4001/4002 download sd4002.flash
 Save this downloaded firmware image file on to a system on the same subnet as the console server
 Also download and read the release_notes.txt for the latest information
 To up-load the firmware image file to your console server, select System: Firmware
 Specify the address and name of the downloaded Firmware Upgrade File, or Browse the local subnet and locate
the downloaded file

Opengear IM4200 Specifications

General

Brand	Opengear
Model	IM4200
Category	Gateway
Language	English