Chapter 11: System Management
232 Console Server & RIM Gateway User Manual
 Click Apply to run all the configurators in the queue
 Alternately click Cancel and this will discard all the delayed configuration changes
Note All the queued configuration changes will be lost if Cancel is selected
To disable the Delayed Configuration Commits mode:
 Uncheck the Delayed Config Commits button under System: Administration and click Apply
 Click the Commit Config button in top right-hand corner of the screen to display the System: Commit
Configuration screen
 Click Apply to run the systemsettings configurator
The Commit Config button will no longer be displayed in the top right-hand corner of the screen and configurations will
no longer be queued.
11.6 FIPS Mode
The ACM5500, ACM5000, IM4004-5 and IM4200 family of advanced console server families all use an embedded
cryptographic module that has been validated to meet the FIPS 140-2 standards.
Note The US National Institute of Standards and Technology (NIST) publishes the FIPS (Federal Information
Processing Standard) series of standards. FIPS 140-1 and FIPS 140-2 are both technical standards and
worldwide de-facto standards for the implementation of cryptographic modules. These standards and guidelines
are issued by NIST for use government-wide. NIST develops FIPS when there are compelling Federal
government requirements such as for security and interoperability and there are no acceptable industry standards
or solutions.
To Next Page
Loading...
Need help?
General
