Opengear IM4200 User Manual

Console Server & Router User Manual 231
After recovering your console server, ensure the problematic configuration is no longer selected for Load On
Erase
11.5 Delayed Configuration Commit
The Delayed Config Commit mode is available on all ACM5500, ACM5000, IM4004-5 and IM4200 family of advanced
console servers with Firmware V3.2 and later.
This mode allows the grouping or queuing of configuration changes and the simultaneous application of these changes to
a specific device. For example, changes to authentication methods or user accounts may be grouped and run once to
minimize system downtime. To enable:
 Check the Delayed Config Commits button under System: Administration
 Click Apply
 The Commit Config icon will be displayed in top right-hand corner of the screen between the Backup and Log Out
icons
To queue then run configuration changes:
 Firstly apply all the required changes to the configuration e.g. modify user accounts, amend authentication
method, enable OpenVPN tunnel or modify system time
 Click the Commit Config button. This will generate the System: Commit Configuration screen displaying all the
configurators to be run

Opengear IM4200 Specifications

General

Brand	Opengear
Model	IM4200
Category	Gateway
Language	English