Connectivity, TCP Ports & Serial I/O
312 Console Server & RIM Gateway User Manual
APPENDIX C: Safety & Certifications
Please take care to follow the safety precautions below when installing and operating the console server:
- Do not remove the metal covers. There are no operator serviceable components inside. Opening or removing the
cover may expose you to dangerous voltage which may cause fire or electric shock. Refer all service to Opengear
qualified personnel
- To avoid electric shock the power cord protective grounding conductor must be connected through to ground.
- Always pull on the plug, not the cable, when disconnecting the power cord from the socket.
Do not connect or disconnect the console server during an electrical storm. Also it is recommended you use a surge
suppressor or UPS to protect the equipment from transients.
FCC Warning Statement
This device complies with Part 15 of the FCC rules. Operation of this device is subject to the following conditions: (1) This
device may not cause harmful interference, and (2) this device must accept any interference that may cause undesired
operation.
To Next Page
Loading...
Need help?
General
