Chapter 13: Management
242 Console Server & RIM Gateway User Manual
Administrator and Users can communicate directly with serial port attached devices from their browser:
 Select the Serial tab on the Manage: Devices menu
 Under the Action column, click the Web Terminal icon to display the Web Terminal, connected directly to the
attached serial device
Note The Web Terminal feature was introduced in firmware V3.3. Earlier releases had an open source jcterm java
terminal applet which could be downloaded into your browser to connect to the console server and attached serial
port devices. However jcterm had some JRE compatibility issues and is no longer supported
13.3.2 SDT Connector access
Administrator and Users can communicate directly with the console server command line and with devices attached to the
console server serial ports using SDT Connector and their local tenet client, or using a Web terminal and their browser
 Select Manage: Terminal
 Click Connect to SDT Connector. This will to activate the SDT Connector client on the computer you are
browsing and load your local telnet client to connect to the command line or serial port using SSH
To Next Page
Loading...
Need help?
General
