Panasonic FP0 - Page 223

Specifications
FP0
12 − 5
12.1 Performance Specifications
Item
Relay output type Transistor output type S−LINK
type
C10RS/
C10RM/
C10CRS/
C10CRM
C14RS/
C14RM/
C14CRS/
C14CRM
C16T/
C16P/
C16CT/
C16CP
C32T/
C32P/
C32CT/
C32CP
T32C SL1
Special
functions
Pulse
output
function
(
*
Nt
Output
point
number
Not available
Two independent points (Y0 and
Y1)(no interpolation function)
Not
available
(* Note
6,10)
Output
frequency
Not available 40Hz to 10kHz (Y0/Y1: one −point
output)
40Hz to 5kHz (Y0/Y1: two−point
output)
Not
available
PWM out-
put func-
tion
(
*
N
6)
Output
point
number
Not available Two points (Y0 and Y1) Not
available
tion
(* Note 6)
Output
frequency
Not available Frequency: 0.15Hz to
38Hz,
(* Note 9)
Duty: 0.1% to 99.9%
Fre-
quency:
0.15Hz to
1KHz
Duty:
0.1% to
99.9%
Not
available
Memory
backup
(
*
Note
6)
Program and system
register
EEPROM
(
*
N
o
t
e
6)
(* Note 12)
Operation memory
Areas which are held if the power
supply fails are fixed, and are
retained by the EEPROM.
− Number of points/words of the
fixed hold areas in the various
memories
Counters: 4 points
Internal relays: 32 points
Date registers: 8 words
(* Note 13)
Areas
which are
held if the
power sup-
ply fails are
fixed, and
are
retained by
the
EEPROM.
− Number
of points/
words of
the fixed
hold areas
in the
various
memories
Counters:
16 points
Internal re-
lays: 128
points
Date
registers:
32 words
(* Note 14)
The oper-
ation mem-
ory is
backed up
using built−
in charge-
able (sec-
ondary )
battery, so
the hold
type mem-
ory areas
can be
specified
using the
program-
ming tools.
(* Note 11)
− Memory
areas
which can
be speci-
fied:
Timers,
Counters,
Internal re-
lays, Data
registers
Areas
which are
held if the
power sup-
ply fails are
fixed, and
are
retained by
the
EEROM.
− Number
of points/
words of
the fixed
hold areas
in the
various
memories
Counters:
16 points
Internal re-
lays: 128
points
Date
registers:
32 words
(* Note 14)
Backup by the
F12/F13 instruction
Available for all data registers
next page
Notes
1) Hold or non−hold type can be set using the system registers.