Panasonic KX-NS1000 - 2.7.5 Walking COS

6.1 E
6.1.1 EFA (External Feature Access)
Description
Normally, an extension user can only access features within the PBX. However, when performing External
Feature Access (EFA) the extension user performs features outside of the PBX, such as using the transfer
services
of the telephone company or host PBX. When EFA is performed, the PBX sends a flash/recall signal
to the telephone company or the host PBX (® 9.1.5 Host PBX Access Code (Access Code to the Telephone
Company from a Host PBX)).
This feature is only available on CO line calls.
This feature is performed by pressing the EFA button or the FLASH/RECALL button that is set to EFA mode
(® 7.1.2 Flash/Recall/Terminate).
Conditions
• Flash/Recall Time
The Flash/Recall time can be assigned for each CO line port.
• EFA Button
A flexible button can be customized as the EFA button.
• It is possible to perform this feature by entering the feature number while the current call is placed on
Consultation Hold (e.g., is going to be transferred to an extension of the host PBX).
(® 4.1.21 Consultation Hold)
PC Programming Manual References
9.25 PBX Configuration—[1-1] Configuration—Slot—Port Property - LCO Port—
Flash Time
10.6.1
PBX Configuration—[2-6-1] System—Numbering Plan—Main—Features—
External Feature Access
12.1.1 PBX Configuration—[4-1-1] Extension
—Wired Extension—Extension Settings—Option 7—
Flash
Mode during CO Conversation
12.1.4 PBX Configuration—[4-1-4] Extension
—Wired Extension—Flexible Button—
Type
12.2.1 PBX Configuration—[4-2-1] Extension
—Portable Station—Extension Settings—Option 7—
Flash
Mode during CO Conversation
12.2.3 PBX Configuration—[4-2-3] Extension
—Portable Station—Flexible Button—
Type
15.5 PBX Configuration
—[7-5] TRS—Miscellaneous—
TRS Check after EFA
Feature Manual References
7.1.3 Flexible Buttons
Operating Manual References
1.3.23 EFA (External Feature Access)
124 Feature Manual Document Version 2016-03
6.1.1 EFA (External Feature Access)