Panasonic KX-NS1000 - Unified Messaging-Custom Service Builder; Unified Messaging-Default Mailbox Template; Unified Messaging-Delete Message Confirmation

Custom Services can be created and edited using the Custom Service Builder utility of Web Maintenance
Console.
PC Programming Manual References
7.5.3 Utility—Report—UM View Reports
23.3 UM Configuration
—[4-3] Service Settings—Custom Service
Operating Manual References
Manager Operation
2.2.2 Message Manager Features—
Recording Messages
20.1.28 Unified Messaging—Custom Service Builder
Description
Allows
the System Administrator to create Custom Services visually, using Web Maintenance Console. Each
Custom Service and its functions can be edited and arranged using this feature.
PC Programming Manual References
23.3 UM Configuration—[4-3] Service Settings—Custom Service
Feature Manual References
20.1.27 Unified Messaging—Custom Service
20.1.29 Unified Messaging—Default Mailbox Template
Description
Is used as a template when the System Administrator creates consecutive mailboxes. It enables the System
Administrator to apply basic settings (Mailbox Parameters, Message Waiting Notification, External Message
Delivery, Auto Forwarding) to multiple mailboxes simultaneously.
PC Programming Manual References
20.1.2 UM Configuration—[1-2] Mailbox Settings—Full Setting
20.1.30 Unified Messaging—Delete Message Confirmation
Description
It is possible to request confirmation from the subscriber before erasing a message left in the mailbox. When
messages are deleted, they will be retained until the time specified in System Maintenance Start Time on
the following day.
402 Feature Manual Document Version 2016-03
20.1.30 Unified Messaging—Delete Message Confirmation