Feature Manual References
7.1.6 FWD (Call Forwarding)
20.1.41 Unified Messaging—Group Distribution Lists
Description
There are 2 types of Group Distribution Lists:
• Group Distribution List
—Personal
Allows a subscriber to simultaneously send a message to several mailboxes. These lists can be created
or edited by the System Administrator and by the subscriber. Each subscriber can maintain a maximum of
4 lists with up to 40 entries in each list.
• Group Distribution List—System
Also called "Mailbox Groups".
Allows subscribers and callers to send messages to all mailboxes that belong to the list at once. These
lists are created by the System Administrator. There are 20 group lists available, and each group list can
have a maximum of 200 members.
PC Programming Manual References
20.1.2 UM Configuration—[1-2] Mailbox Settings—Full Setting—Personal Distribution List
24.1 UM Configuration—[5-1] System Parameters
Operating Manual References
Subscriber Operation
1.6.4 Sending Messages—
Personal Group Distribution Lists
Manager Operation
2.2.1 System Manager Features— Broadcasting Messages
20.1.42 Unified Messaging—Hold
Description
Provides
the caller with the option of temporarily going on hold when the called extension is busy. The Unified
Messaging system automatically recalls the extension after a specified period of time. When several callers
are holding for the same extension, callers are connected to the extension in the order in which they originally
called.
PC Programming Manual References
23.1 UM Configuration—[4-1] Service Settings—Caller ID / PIN Call Routing—23.2 UM Configuration—[4-2]
Service Settings—Parameters—
Call Hold Mode
Document Version 2016-03 Feature Manual 409
20.1.42 Unified Messaging—Hold
To Next Page
Loading...
