Panasonic KX-NS1000 - 3.2.2.34 Two-way Record;Two-way Transfer

Feature Manual References
7.1.3 Flexible Buttons
Operating Manual References
1.3.54 Private Network Features—CLIP (Calling Line Identification Presentation)
1.3.55 Private Network Features—CLIR (Calling Line Identification Restriction)
1.3.57 Private Network Features—COLR (Connected Line Identification Restriction)
15.1.21 Private Network Features—QSIG—CT (Call Transfer)
Description
The PBX transfers the call to a destination extension in another PBX in the QSIG network.
If the same trunk group is used for the incoming call and the transferred call, the following situation will be
possible.
[Example]
PBX-1
QSIG
PBX-2
Dials "2000".
PBX-1
QSIG
PBX-2
Extn. 1000 Extn. 1001 Extn. 2000
Extn. 1000 Extn. 1001 Extn. 2000
Call to 2000
1
Transferred
to 1001
2
3
1
Extension 1000 of PBX-1 dials
extension number
"2000", and the call
is sent to extension "2000" of PBX-2
through QSIG network.
2
The call is transferred from extension
2000 to extension "1001
" of PBX-1.
3
The call between PBX-1 and PBX-2 is
released, and the call is connected
directly to the transfer destination of
extension 2000.
Document Version 2016-03 Feature Manual 313
15.1.21 Private Network Features—QSIG—CT (Call Transfer)