Panasonic KX-NS1000 - Unified Messaging-Intercept Routing to a Mailbox; Unified Messaging-Intercom Paging

Feature Manual References
20.1.48 Unified Messaging
—Intercom Paging
Operating Manual References
Subscriber Operation
1.6.5 Transferring Calls—
Incomplete Call Handling
20.1.47 Unified Messaging—Intercept Routing to a Mailbox
Description
If
the Intercept Routing destination is set to the floating extension number of the UM group, and the "Intercept
to Mailbox for Call to Extension" setting is enabled through system programming, intercepted CO line calls
will be redirected to the extension's mailbox. Therefore the caller can leave a message in the mailbox of the
extension without knowing the mailbox number.
PC Programming Manual References
11.7.1 PBX Configuration—[3-7-1] Group—UM Group—System Settings—
Intercept to Mailbox for Call to
Extension
Feature Manual References
10.1.12 Intercept Routing
20.1.48 Unified Messaging—Intercom Paging
Description
Allows callers to page subscribers when the subscribers have set Intercom Paging for Call Transfer or when
the subscribers have set Intercom Paging for Incomplete Call Handling. The caller is briefly placed on hold
while
the system announces the page and until the subscriber answers the page. The subscriber can answer
the page from any extension using the paging answer feature number. If Caller ID information is received and
the caller’s name has been recorded for the Caller Name Announcement feature, the name will be announced
at the end of the page.
To utilize this feature, the following settings are necessary:
1. Assign an Intercom Paging Group to the desired Class of Service.
® 21.1 UM Configuration—[2] Class of Service—Call Transfer—
Intercom Paging Group
2. Set "No Answer Time for Intercom Paging" to the desired setting.
® 24.4 UM Configuration
—[5-4] System Parameters—Parameters—
No Answer Time for Intercom
Paging (1-30 s)
PC Programming Manual References
21.1 UM Configuration—[2] Class of Service—Call Transfer— Intercom Paging Group
24.4 UM Configuration
—[5-4] System Parameters—Parameters—Intercom Paging Parameters
412 Feature Manual Document Version 2016-03
20.1.48 Unified Messaging—Intercom Paging