Panasonic KX-NS1000 - 4.3.1.1 Making a TIE Line Call

Feature Manual References
4.1.10 Call Transfer
4.1.22 COS (Class of Service)
5.1.7 DID (Direct Inward Dialing)
5.1.10 DISA (Direct Inward System Access)
9.1.5 Host PBX Access Code (Access Code to the Telephone Company from a Host PBX)
10.1.3 ICD Group Features—Log-in/Log-out
15.1.12 PRIVATE NETWORK FEATURES
23.1 Capacity of System Resources
18.1.7 SNMP (Simple Network Management Protocol) System
Monitor
Description
It
is possible for a PC assigned as an SNMP manager to manage and receive PBX system status information,
such as alarm information and general system activity using SNMP. Management Information Bases (MIBs)
are sent to a PC (i.e., the SNMP manager) connected to the PBX over a LAN and can then be stored and
analyzed using SNMP manager software.
The two features for managing information using SNMP are as follows:
– Polling:
A bilateral transaction of information. Polling allows the manager to request information from the PBX.
PC
Response
Request
PBX
Manager
– TRAP:
An automatic relay of information from the PBX when a status change occurs or an alarm is detected.
PBX
PC
Sends Information
Manager
TRAP Implementation
The PBX will send the two types of TRAP as follows:
Document Version 2016-03 Feature Manual 357
18.1.7 SNMP (Simple Network Management Protocol) System Monitor